Micro-Energy Division Lithium rechargeable batteries (MS, HB, TS) contain fl ammable organic solvents. For your safety, please follow the following prohibitions.

♦Do not charge by high current or high voltage.
Doing so may generate gas inside the battery, resulting swelling, catching fi re, heat generation or bursting.
♦Do not heat, disassemble nor dispose of in fire
Doing so damages the insulation materials and may cause catching fi re, heat generation, leakage or bursting.
♦Do not solder directly to the battery
If soldering is performed directly to the battery, the battery is heated up, consequently causing leakage, explosion or fire due to overheating from internal short-circuiting.
♦Do not short.
If the (+) and (-) come into contact with metal materials, short-circuiting occurs. As a result, catching fire, heat generation, leakage or bursting may occur.
♦Keep batteries out of children's reach.
If leaked liquid is ingested or a battery is swallowed, consult a physician immediately.
♦Do not reverse placement of (+) and (-)
If the (+)and(-) side of the battery is reverse inserted, it may cause a short-circuiting or over discharge of the battery on some equipment and it may induce overheating, explosion or fire.
♦Do not discharge by force
If the battery is discharged by direct connection to an external power supply etc., voltage of the battery will decline lower than 0 volts (electrical reversal) and will cause the battery case to expand, overheat, leak, explode or burn.
♦In case of leakage or a strange smell, keep away from fire to prevent ignition of any leaked electrolyte.
♦In case of disposal, insulate between (+) and (-) of battery by an insulating
Jumbling batteries or with other metal materials cause short-circuiting. As a result, catching fire, heat generation, leakage or bursting may occur.

♦If leaked liquid gets in the eyes, wash them with clean water and consult a physician immediately.
♦Do not use new and used batteries together. Do not use different types of batteries together.
It may cause catching fire, heat generation, leakage or bursting.
♦If you connect two or more batteries in series or parallel, please consult us in advance.
It may cause bursting or catching fi re due unbalanced load or voltage.
♦Do not use nor leave the batteries in direct sunlight nor in high-temperature areas.
It may cause catching fire, heat generation, leakage or bursting.
♦Do not apply strong pressure to the batteries nor handle roughly.
It may cause catching fire, heat generation, leakage or bursting.
♦Avoid contact with water.
It may cause heat generation.
♦Keep batteries away from direct sunlight, high temperature and humidity.
It may cause heat generation or performance deterioration.